Same-Day Ice Maker Repair in Coppell & Surrounding Cities
Certified technicians, all major brands, professional service
Real Repairs by Our Technicians
Brands We Service
Our certified technicians are trained to repair appliances from all major brands
Ice Maker Repair in Nearby Cities
Our Samsung fridge stopped cooling overnight. Called Max Appliance and they sent someone out same day. The technician was professional, explained everything clearly, and had us back up and running in under 2 hours. Pricing was fair and transparent. Highly recommend!
Washer was making a horrible noise. The tech arrived on time, diagnosed the issue quickly (worn bearing), and completed the repair efficiently. Very knowledgeable and reasonably priced. Will definitely use them again.
Had an issue with our GE dishwasher not draining. Max Appliance came out the next day, fixed it within an hour, and cleaned up everything. The technician was courteous and explained what caused the problem. Great service!
Our LG dryer stopped heating. Called Max Appliance and they were able to fit us in the same day. The repair was done professionally and the price was exactly what they quoted over the phone. Very satisfied with the service.
Excellent service! Our Whirlpool refrigerator was leaking water. The technician arrived within the scheduled window, quickly identified the problem, and had the parts needed in his truck. Fixed it on the spot. Very pleased!
Called them for our Maytag washer that wouldn't spin. They came out same day, tech was friendly and professional. Fixed the issue and gave us maintenance tips to prevent future problems. Fair pricing too. Would recommend!
Our KitchenAid oven stopped working right before Thanksgiving. Max Appliance saved the day! Same-day service, professional technician, and reasonable rates. We were so relieved. Thank you!
Had them fix our dishwasher last year and they did such a great job we called them again for our fridge. Always reliable, professional, and fair pricing. They're our go-to for all appliance repairs now.
Very responsive and professional. Our freezer stopped working and they came out within hours. The technician was knowledgeable and explained everything clearly. Repair was done quickly and hasn't had any issues since.
Forty-one thousand residents packed into one of Dallas County's most affluent zip codes — 75019 — means a lot of Sub-Zero and Thermador refrigerators with built-in units running in newer construction homes off MacArthur Boulevard and Sandy Lake Road. Dallas municipal water runs around 150–180 mg/L hardness, and that calcium load hits the water inlet valve and ice maker assembly quietly over months. Same-day service in Coppell — usually there within 2 hours of your call. Evening slots available for homeowners who can't take time off work.
Most Coppell homes were built between 1985 and 2005, which puts kitchen appliances at either still-original or one mid-range replacement deep. Homes near Andy Brown Park and along Samuel Boulevard tend to run older Whirlpool and GE Profile setups — parts are available, but the harvest mechanism and bin thermostat have been cycling for 15-plus years. Gaskets crack. Defrost timers drift. It's age, not abuse. In 75019, newer construction near the Town Center and Old Town Coppell tends to have KitchenAid or Bosch built-in units — panel-ready models tucked into custom cabinetry. Estates closer to Freeport Parkway often spec Sub-Zero or Thermador column refrigerators where the ice production module is embedded in the unit itself, not bolted on as an afterthought. Those require a different diagnostic approach than a freestanding Samsung or LG pulled from a big-box store. Pulling the wrong access panel without knowing the model series can snap the door hinge assembly on a Thermador — that turns a $180 repair into a $600 one. Viking units in Coppell's higher-bracket kitchens sometimes need firmware-level resets that a standard multimeter won't catch. Technicians without that specific service history just swap parts until something works. That's not a strategy here.
Common Ice Maker Issues in Coppell
Mineral Scale Blocking the Fill Valve — A 75019 Hard-Water Problem
Dallas County water carries enough calcium to coat the water inlet valve after two or three years of daily cycling. That Sub-Zero under-counter unit stops producing — not because the motor failed, but because the valve orifice is partially calcified. Scale can also migrate up the fill tube and freeze against it, compounding the blockage. Replacing the valve, flushing the supply line, and testing the freeze timer usually closes the job in a single Coppell visit. The part itself is around $60–$90 on Sub-Zero; labor adds an hour.
Optical Sensor Failures in Thermador and Viking Built-Ins
Thermador and Viking built-in units use infrared sensors to detect when the bin is full. Texas summers push ambient temps in kitchens and adjacent utility areas higher, and those sensors drift out of calibration or fail outright. The result is either zero production or continuous cycling that overflows the bin. On some Viking models, the LED board driving the sensor is a separate serviceable component — replacing just that board avoids the cost of pulling the full control assembly. Coppell kitchens without ventilation near the unit see this failure more often in July and August.
Frozen Fill Lines During Texas Cold Snaps
Coppell saw hard freeze events in both 2021 and 2023 that caught homeowners off guard. The supply line — often a 1/4-inch copper or plastic tube routed through an exterior cabinet wall — freezes solid. Thawing it incorrectly cracks the line or damages the water inlet valve downstream. Diagnosis first, parts second. If the line split, we can usually source a replacement copper run the same day from a supplier near 635 and have it done before dinner. Don't use a heat gun on a plastic line.
Frequently Asked Questions
How fast can you get to Coppell for ice maker repair?▼
Technicians run out of Dallas and Irving daily — Coppell is a 20–35 minute drive depending on Belt Line Road or 635 traffic. Call (832) 366-1414 before noon and we can usually get there same day, including evening slots.
Do you repair Sub-Zero and Thermador ice makers?▼
Yes — those are the two most common premium brands in Coppell. Viking, Bosch, and KitchenAid built-ins too. Sub-Zero diagnostics require specific tools and module knowledge most generalists skip; we carry both and have service history on the common 700 and 600 series units.
What does ice maker repair typically cost in Coppell?▼
A clogged water inlet valve on a KitchenAid runs $120–$180 parts and labor. A Sub-Zero ice maker assembly module replacement sits higher — $300–$500 depending on the unit generation. Quote before we touch anything, no surprises. Emergency same-day slots available.
My Bosch or Miele built-in shows an error code but still seems to run — do I need a repair?▼
Most likely yes. Bosch units commonly display E:24 or drain-related codes that affect ice production even when the refrigerator appears functional. Miele error codes are model-specific and often precede a full module failure by days, not weeks. If you're seeing a flashing indicator or a persistent fault, call us at (832) 366-1414 — catching it early in Coppell typically cuts the repair bill significantly compared to waiting for a complete breakdown.
Need Ice Maker Repair in Coppell?
Same-day service available. Call now for a free estimate.
(888) 771-3235