Same-Day Built-In Oven Repair in Irving & Surrounding Cities
Certified technicians, all major brands, professional service
Real Repairs by Our Technicians
Brands We Service
Our certified technicians are trained to repair appliances from all major brands
Built-In Oven Repair in Nearby Cities
Our Samsung fridge stopped cooling overnight. Called Max Appliance and they sent someone out same day. The technician was professional, explained everything clearly, and had us back up and running in under 2 hours. Pricing was fair and transparent. Highly recommend!
Washer was making a horrible noise. The tech arrived on time, diagnosed the issue quickly (worn bearing), and completed the repair efficiently. Very knowledgeable and reasonably priced. Will definitely use them again.
Had an issue with our GE dishwasher not draining. Max Appliance came out the next day, fixed it within an hour, and cleaned up everything. The technician was courteous and explained what caused the problem. Great service!
Our LG dryer stopped heating. Called Max Appliance and they were able to fit us in the same day. The repair was done professionally and the price was exactly what they quoted over the phone. Very satisfied with the service.
Excellent service! Our Whirlpool refrigerator was leaking water. The technician arrived within the scheduled window, quickly identified the problem, and had the parts needed in his truck. Fixed it on the spot. Very pleased!
Called them for our Maytag washer that wouldn't spin. They came out same day, tech was friendly and professional. Fixed the issue and gave us maintenance tips to prevent future problems. Fair pricing too. Would recommend!
Our KitchenAid oven stopped working right before Thanksgiving. Max Appliance saved the day! Same-day service, professional technician, and reasonable rates. We were so relieved. Thank you!
Had them fix our dishwasher last year and they did such a great job we called them again for our fridge. Always reliable, professional, and fair pricing. They're our go-to for all appliance repairs now.
Very responsive and professional. Our freezer stopped working and they came out within hours. The technician was knowledgeable and explained everything clearly. Repair was done quickly and hasn't had any issues since.
Valley Ranch homes in 75063 were built out through the late '80s and early '90s with double wall ovens spec'd into original cabinetry — KitchenAid and GE Profile units now pushing 30+ Texas summers. The upper cavity fails first, almost always. A burned-out heating element or tripped thermal fuse is the usual cause, and in most cases we stock those parts on the truck already. North Irving's older housing stock is a different story: Whirlpool units from the same era running on original 30-amp wiring, never updated since the original install.
The MacArthur corridor and Story Road neighborhoods in North Irving (75061) have some of the oldest housing stock in the city — mid-80s builds with Whirlpool double wall ovens still in their original cut-outs. Finding parts for those gets harder every year. Newer construction around Campion Trail and Las Colinas (75039) leans toward Samsung and Bosch wall ovens installed post-2010, completely different failure patterns. The Las Colinas Urban Center area near the Toyota Music Factory and the O'Connor Road corridor has seen a lot of condo and townhome development since 2015. Those kitchens mostly came with LG or Samsung configurations, but a solid number of custom builds got double wall oven setups instead of range-style units. Irving pulls water from the Trinity River basin, and hardness runs around 120-150 ppm depending on the zone. That mineral load shows up in dishwashers most visibly, but it also silts up oven temperature sensor housings over time — especially on GE Profile and KitchenAid units that use open-probe sensors near steam vents. Heritage District homes near Irving Boulevard (75060) are some of the oldest in the city, 1950s-60s construction that's been renovated multiple times. Some of those kitchens still have original circuits that won't support modern wall oven draws without tripping breakers — that's a diagnostic step we always check before assuming the unit itself failed.
Common Built-In Oven Issues in Irving
Upper Cavity Dead While Lower Runs Fine
Wall ovens with two cavities fail up top first — that section runs hotter on average and cycles more. On KitchenAid units common in Valley Ranch, the F3 error code usually precedes complete failure. That's the oven temperature sensor flagging a problem before the heating element fully burns out. Ignoring F3 for a few weeks accelerates the element failure. By the time the cavity stops heating entirely, both the sensor probe and the control board have been taking stress damage — sometimes the board needs replacement too, which changes the repair cost significantly. Early diagnosis saves money here.
30-Degree Temperature Gap Between Cavities
GE Profile units from the early 2000s have a known pattern where the upper cavity overshoots by 25-40 degrees. The oven temperature sensor probe wears out and loses calibration, or the control board stops reading it accurately. Irving's moderately hard tap water adds to the problem — mineral residue gets into the sensor housing over time. You'll notice it when baked goods come out overdone on top, or you check with a separate thermometer and see actual temp drifting above the set point. Sensor replacement on GE Profile usually runs under $200 total. Control board diagnosis takes more time but we can quote it same visit. Call (832) 366-1414 if your Irving oven is cooking unevenly — we can get there same day.
Upper Door Won't Seal — Drooping Hinge Assembly
Older Whirlpool and KitchenAid wall ovens have heavy doors that wear out the hinge assembly after years of daily use. A bad seal means heat escapes, cooking times go unpredictable, and the control board starts throwing false temperature errors. Wrong-size replacement hinges are a common DIY mistake that makes things significantly worse. On Irving's older units — especially 75061 builds from the mid-80s — the hinge receiver brackets inside the cabinet can also loosen from the surrounding wood structure. That's a bracket repair that has to happen before new hinges will hold. Getting both fixes done right the first time avoids a callback.
Frequently Asked Questions
How fast can you get to Irving for wall oven repair?▼
Most Irving calls get same-day service — technicians run the 183 and 114 corridors daily. Valley Ranch, Las Colinas, and South Irving are all on regular routes. Call (832) 366-1414 and we can usually be there within 2 hours.
Do you repair Samsung and Bosch double wall ovens in Irving?▼
Yes — Samsung glass-touch models and Bosch wall ovens are common in Las Colinas and the newer Campion Trail developments. Control board replacements on both are routine, plus Whirlpool, KitchenAid, and GE across the older Irving neighborhoods.
What does the repair cost, and is same-day service actually available?▼
Diagnostic visit is $89, applied toward the repair. Heating element or thermal fuse replacement usually runs $150-220 total — control board is higher. Same-day slots open most weekdays, evening appointments available too. Schedule at (832) 366-1414.
Is it worth fixing a wall oven that's 15-20 years old?▼
Depends on the brand and what failed. A KitchenAid or Whirlpool unit from 2005-2010 with a dead heating element or blown thermal fuse is almost always worth repairing — parts are still available and the job runs $150-250. Control board failure on the same unit is a harder call; a replacement board can cost $300-400 in parts alone. For GE Profile units from that era, we'll give you an honest read on part availability before you commit to anything. Irving's older stock in 75060 and 75061 includes some units where sourcing is genuinely difficult — we'll say so upfront rather than waste your time.
Need Built-In Oven Repair in Irving?
Same-day service available. Call now for a free estimate.
(888) 771-3235