Same-Day Built-In Oven Repair in Frisco & Surrounding Cities
Certified technicians, all major brands, professional service
Real Repairs by Our Technicians
Brands We Service
Our certified technicians are trained to repair appliances from all major brands
Built-In Oven Repair in Nearby Cities
Our Samsung fridge stopped cooling overnight. Called Max Appliance and they sent someone out same day. The technician was professional, explained everything clearly, and had us back up and running in under 2 hours. Pricing was fair and transparent. Highly recommend!
Washer was making a horrible noise. The tech arrived on time, diagnosed the issue quickly (worn bearing), and completed the repair efficiently. Very knowledgeable and reasonably priced. Will definitely use them again.
Had an issue with our GE dishwasher not draining. Max Appliance came out the next day, fixed it within an hour, and cleaned up everything. The technician was courteous and explained what caused the problem. Great service!
Our LG dryer stopped heating. Called Max Appliance and they were able to fit us in the same day. The repair was done professionally and the price was exactly what they quoted over the phone. Very satisfied with the service.
Excellent service! Our Whirlpool refrigerator was leaking water. The technician arrived within the scheduled window, quickly identified the problem, and had the parts needed in his truck. Fixed it on the spot. Very pleased!
Called them for our Maytag washer that wouldn't spin. They came out same day, tech was friendly and professional. Fixed the issue and gave us maintenance tips to prevent future problems. Fair pricing too. Would recommend!
Our KitchenAid oven stopped working right before Thanksgiving. Max Appliance saved the day! Same-day service, professional technician, and reasonable rates. We were so relieved. Thank you!
Had them fix our dishwasher last year and they did such a great job we called them again for our fridge. Always reliable, professional, and fair pricing. They're our go-to for all appliance repairs now.
Very responsive and professional. Our freezer stopped working and they came out within hours. The technician was knowledgeable and explained everything clearly. Repair was done quickly and hasn't had any issues since.
Phillips Creek Ranch and Newman Village in 75034 went up fast — builders spec'd Thermador double wall ovens into these kitchens as standard. Those units are now 8–12 years old and showing it: temperature gaps between the upper and lower cavities, door hinges that won't hold position, control boards throwing fault codes mid-Sunday dinner. Call (832) 366-1414 — we're usually in Frisco within two hours.
Most of the housing stock in 75035 and 75033 dates from 2005 to 2018 — custom builds and production homes that came pre-fitted with full built-in kitchen suites. Wolf and KitchenAid double ovens are common in the Starwood and Richwoods areas, set into floor-to-ceiling cabinetry where a DIY pull-out is not realistic without the right tools. Panel-ready installs need a tech who has seen the configuration before, not someone guessing from a generic service manual. The corridor along Legacy Drive between Preston Road and the Dallas North Tollway is dense with 4,000-plus-square-foot builds where a double wall oven was the baseline kitchen spec — not an upgrade. Stonebriar and The Trails neighborhoods sit right in this band. Frisco's municipal water supply draws from Lake Lewisville and runs moderately hard — 200–300 ppm in most ZIP codes. Not San Antonio levels, but after five or six years you start seeing mineral scale clog the ice maker water line, the steam injection port on Miele units, and the inlet valve screen on Wolf steam-assist models. Those components get flushed or replaced on a significant share of our 75034 and 75036 service calls.
Common Built-In Oven Issues in Frisco
Upper Cavity Dead, Lower Fine — Heating Element or Thermal Fuse Split
Each cavity in a Thermador double wall unit runs its own bake heating element and independent thermal fuse. One fuse blows — one oven goes cold. It reads fine on the display, preheats forever, never gets there. The fault code showing — usually E-118 or a close variation — tells us which cavity failed before we pull the unit from the wall. We stock Thermador-spec elements and can swap same day in most 75034 cases.
Temperature Mismatch Between Cavities — Drifting RTD Sensor or Bad Control Board
Your Wolf upper oven claims 375°F. A thermometer inside reads 310°F. That gap is almost always a failed RTD temperature sensor or a control board that's lost its calibration offset. Wolf double ovens around year seven to nine develop this pattern, particularly in west-facing Frisco kitchens that absorb afternoon Texas sun for six months straight — the thermal stress on the board adds up. Homes along Eldorado Parkway in 75033 face this more than most, given how those subdivision lots are oriented.
Sagging Door Won't Seal — Broken Hinge Arm on KitchenAid Built-Ins
A KitchenAid KODC304ESS with a lower door that drops three or four degrees has a failed hinge arm or cracked hinge receiver bracket. The door gasket stops making full contact, both cavities run hot trying to compensate, and cook times go sideways. Homes in 75036 built 2012–2016 hit this failure window now, especially with the lower oven doing daily duty.
Frequently Asked Questions
How fast can you get to Frisco for Double Oven repair?▼
Frisco is a core run for us — techs move through the Preston Road corridor regularly and we keep slots open for 75034 and 75035 calls. Most requests get same-day. Call (832) 366-1414 and we'll give you a two-hour arrival window, not a six-hour one.
Do you repair Thermador, Wolf, and KitchenAid double wall ovens?▼
Those three are the bulk of what we see in Frisco. Thermador double ovens usually need control board replacement or thermal fuse work. Wolf units tend to need bake element swaps or RTD sensor diagnosis. KitchenAid built-ins almost always need hinge assembly parts. We carry stock for all three. Miele and Viking units show up in Starwood custom builds — parts lead time can run two to three days on those, and we flag that on the diagnostic call before any work starts.
What does a double oven repair cost in Frisco, and can I get evening service?▼
Diagnostic fee is $85–95 and applies toward the repair. A heating element swap typically runs $220–360 depending on brand. Control board replacement on a Thermador runs higher — usually $380–620 for parts and labor. Evening slots are open most weekdays. Schedule online or call (832) 366-1414 to check today's availability.
Need Built-In Oven Repair in Frisco?
Same-day service available. Call now for a free estimate.
(888) 771-3235